Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants

J. Pontt, J. Rodriguez, J. San Martin, R. Aguilera, R. Bernai, P. Newman

Resultado de la investigación: Conference contribution

4 Citas (Scopus)

Resumen

Mining systems have complex power networks including high-power equipment, variable configuration and distributed harmonic injections. This paper presents the problem of resonance mitigation and dynamical behavior of a power system with harmonic filters (HF) for improving reliability in mining plants. It is known that the main objective of the harmonic filters is to provide power factor correction and limiting the harmonic distortions. Nevertheless, until now it is not well covered in the literature that HF also provides mitigation of impedance resonances. Simulation results obtained of the transient behavior analysis of industrial electrical system when harmonic filters are switched are presented, with good correlation between steady and transient behavior, supporting the results given by tools intended for stationary analysis of harmonics performance. Different operating conditions of an industrial power system given by variable topology, multiple harmonic injections and loading factor should be taken into account for the proper design of HF systems. The presented methodology supports the risk assessment, failure analysis and reliability improvement of industrial systems as well as the decision making process at the design stage of power systems

Idioma originalEnglish
Título de la publicación alojadaConference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting
Páginas1298-1302
Número de páginas5
Volumen3
DOI
EstadoPublished - 2006
Evento2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting - Tampa, FL, United States
Duración: 8 oct 200612 oct 2006

Other

Other2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting
PaísUnited States
CiudadTampa, FL
Período8/10/0612/10/06

Huella dactilar

Switched filters
Harmonic distortion
Risk assessment
Failure analysis
Decision making
Topology

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Citar esto

Pontt, J., Rodriguez, J., San Martin, J., Aguilera, R., Bernai, R., & Newman, P. (2006). Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants. En Conference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting (Vol. 3, pp. 1298-1302). [4025385] https://doi.org/10.1109/IAS.2006.256698
Pontt, J. ; Rodriguez, J. ; San Martin, J. ; Aguilera, R. ; Bernai, R. ; Newman, P. / Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants. Conference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting. Vol. 3 2006. pp. 1298-1302
@inproceedings{0e6a108afe4b47cfbfbc4cd6c6d2b716,
title = "Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants",
abstract = "Mining systems have complex power networks including high-power equipment, variable configuration and distributed harmonic injections. This paper presents the problem of resonance mitigation and dynamical behavior of a power system with harmonic filters (HF) for improving reliability in mining plants. It is known that the main objective of the harmonic filters is to provide power factor correction and limiting the harmonic distortions. Nevertheless, until now it is not well covered in the literature that HF also provides mitigation of impedance resonances. Simulation results obtained of the transient behavior analysis of industrial electrical system when harmonic filters are switched are presented, with good correlation between steady and transient behavior, supporting the results given by tools intended for stationary analysis of harmonics performance. Different operating conditions of an industrial power system given by variable topology, multiple harmonic injections and loading factor should be taken into account for the proper design of HF systems. The presented methodology supports the risk assessment, failure analysis and reliability improvement of industrial systems as well as the decision making process at the design stage of power systems",
keywords = "Filter switching, Harmonic filters, Harmonics, Overvoltages, Transients",
author = "J. Pontt and J. Rodriguez and {San Martin}, J. and R. Aguilera and R. Bernai and P. Newman",
year = "2006",
doi = "10.1109/IAS.2006.256698",
language = "English",
isbn = "1424403642",
volume = "3",
pages = "1298--1302",
booktitle = "Conference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting",

}

Pontt, J, Rodriguez, J, San Martin, J, Aguilera, R, Bernai, R & Newman, P 2006, Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants. En Conference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting. vol. 3, 4025385, pp. 1298-1302, 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting, Tampa, FL, United States, 8/10/06. https://doi.org/10.1109/IAS.2006.256698

Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants. / Pontt, J.; Rodriguez, J.; San Martin, J.; Aguilera, R.; Bernai, R.; Newman, P.

Conference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting. Vol. 3 2006. p. 1298-1302 4025385.

Resultado de la investigación: Conference contribution

TY - GEN

T1 - Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants

AU - Pontt, J.

AU - Rodriguez, J.

AU - San Martin, J.

AU - Aguilera, R.

AU - Bernai, R.

AU - Newman, P.

PY - 2006

Y1 - 2006

N2 - Mining systems have complex power networks including high-power equipment, variable configuration and distributed harmonic injections. This paper presents the problem of resonance mitigation and dynamical behavior of a power system with harmonic filters (HF) for improving reliability in mining plants. It is known that the main objective of the harmonic filters is to provide power factor correction and limiting the harmonic distortions. Nevertheless, until now it is not well covered in the literature that HF also provides mitigation of impedance resonances. Simulation results obtained of the transient behavior analysis of industrial electrical system when harmonic filters are switched are presented, with good correlation between steady and transient behavior, supporting the results given by tools intended for stationary analysis of harmonics performance. Different operating conditions of an industrial power system given by variable topology, multiple harmonic injections and loading factor should be taken into account for the proper design of HF systems. The presented methodology supports the risk assessment, failure analysis and reliability improvement of industrial systems as well as the decision making process at the design stage of power systems

AB - Mining systems have complex power networks including high-power equipment, variable configuration and distributed harmonic injections. This paper presents the problem of resonance mitigation and dynamical behavior of a power system with harmonic filters (HF) for improving reliability in mining plants. It is known that the main objective of the harmonic filters is to provide power factor correction and limiting the harmonic distortions. Nevertheless, until now it is not well covered in the literature that HF also provides mitigation of impedance resonances. Simulation results obtained of the transient behavior analysis of industrial electrical system when harmonic filters are switched are presented, with good correlation between steady and transient behavior, supporting the results given by tools intended for stationary analysis of harmonics performance. Different operating conditions of an industrial power system given by variable topology, multiple harmonic injections and loading factor should be taken into account for the proper design of HF systems. The presented methodology supports the risk assessment, failure analysis and reliability improvement of industrial systems as well as the decision making process at the design stage of power systems

KW - Filter switching

KW - Harmonic filters

KW - Harmonics

KW - Overvoltages

KW - Transients

UR - http://www.scopus.com/inward/record.url?scp=34948879602&partnerID=8YFLogxK

U2 - 10.1109/IAS.2006.256698

DO - 10.1109/IAS.2006.256698

M3 - Conference contribution

AN - SCOPUS:34948879602

SN - 1424403642

SN - 9781424403646

VL - 3

SP - 1298

EP - 1302

BT - Conference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting

ER -

Pontt J, Rodriguez J, San Martin J, Aguilera R, Bernai R, Newman P. Resonance mitigation and dynamical behavior of systems with harmonic filters for improving reliability in mining plants. En Conference Record of the 2006 IEEE Industry Applications Conference - Forty-First IAS Annual Meeting. Vol. 3. 2006. p. 1298-1302. 4025385 https://doi.org/10.1109/IAS.2006.256698