TY - JOUR
T1 - Predictive Control Based DC Microgrid Stabilization with the Dual Active Bridge Converter
AU - Chen, Linglin
AU - Gao, Fei
AU - Shen, Ke
AU - Wang, Zhenyu
AU - Tarisciotti, Luca
AU - Wheeler, Patrick
AU - Dragicevic, Tomislav
N1 - Funding Information:
Manuscript received August 28, 2019; revised November 1, 2019 and November 26, 2019; accepted December 16, 2019. Date of publication January 15, 2020; date of current version June 3, 2020. This work was supported by the Office of Naval Research Global under Grant N62909-17-1-2106. (Corresponding author: Fei Gao.) L. Chen, Z. Wang, and P. Wheeler are with the Department of Electrical and Electronics Engineering, University of Nottingham, Nottingham NG7 2RD, U.K. (e-mail: [email protected]; [email protected]; [email protected]).
Publisher Copyright:
© 1982-2012 IEEE.
PY - 2020/10
Y1 - 2020/10
N2 - Dual-active-bridge (DAB) enabled dc microgrids stabilization is investigated in this article. DAB has two control objectives: load current regulation and the dc-bus voltage stabilization. In multiobjective control applications, the conventional proportional integrator (PI)-based controllers face challenges in the control loop coordination. The saturation of the loops largely deteriorate the control performance. Moreover, the system impedance has to be measured before designing the active damping control. In this article, a moving discretized control set - model predictive control (MDCS-MPC) is proposed for DAB. The proposed MDCS-MPC is inherently a good choice for multiobjective control. It provides several advantages, such as a good tradeoff between two control objectives and adaptive performance on system impedance. The evaluation and comparison of the proposed MDCS-MPC and PI are carried out. Experiments on a 270-270V, 20 kHz, 1 kW DAB converter are conducted to verify the theoretical claims.
AB - Dual-active-bridge (DAB) enabled dc microgrids stabilization is investigated in this article. DAB has two control objectives: load current regulation and the dc-bus voltage stabilization. In multiobjective control applications, the conventional proportional integrator (PI)-based controllers face challenges in the control loop coordination. The saturation of the loops largely deteriorate the control performance. Moreover, the system impedance has to be measured before designing the active damping control. In this article, a moving discretized control set - model predictive control (MDCS-MPC) is proposed for DAB. The proposed MDCS-MPC is inherently a good choice for multiobjective control. It provides several advantages, such as a good tradeoff between two control objectives and adaptive performance on system impedance. The evaluation and comparison of the proposed MDCS-MPC and PI are carried out. Experiments on a 270-270V, 20 kHz, 1 kW DAB converter are conducted to verify the theoretical claims.
KW - Dual-active-bridge (DAB)
KW - model predictive control (MPC)
UR - http://www.scopus.com/inward/record.url?scp=85087458118&partnerID=8YFLogxK
U2 - 10.1109/TIE.2020.2965460
DO - 10.1109/TIE.2020.2965460
M3 - Article
AN - SCOPUS:85087458118
SN - 0278-0046
VL - 67
SP - 8944
EP - 8956
JO - IEEE Transactions on Industrial Electronics
JF - IEEE Transactions on Industrial Electronics
IS - 10
M1 - 8960628
ER -