Cycloconverter drive system for fault diagnosis study: Real time model, simulation and construction

J. Pontt, J. Rodríguez, E. Cáceres, I. Illanes, C. Silva

Resultado de la investigación: Contribución a los tipos de informe/libroContribución a la conferenciarevisión exhaustiva

10 Citas (Scopus)

Resumen

This paper presents a study of a monitoring system for a cycloconverter, based on a real time reference model, for monitoring the electric behavior of a cycloconverter. For this purpose, a complete three-phase, 6-pulse cycloconverter system, operating from a 50 Hz input, was simulated and constructed. In addition, a real time reference model that works in parallel with the cycloconverter control was implemented. The main advantage of this system over the conventional fault diagnosis systems is the reduction number of required measured signals. The fault detection algorithm is based on a real-time error signal obtained between the real-time reference model output and the sensed cycloconverter output voltage. The fault detection method was implemented and tested on a laboratory scale prototype cycloconverter drive system.

Idioma originalInglés
Título de la publicación alojada37th IEEE Power Electronics Specialists Conference 2006, PESC'06
DOI
EstadoPublicada - 2006
Evento37th IEEE Power Electronics Specialists Conference 2006, PESC'06 - Jeju, República de Corea
Duración: 18 jun 200622 jun 2006

Otros

Otros37th IEEE Power Electronics Specialists Conference 2006, PESC'06
País/TerritorioRepública de Corea
CiudadJeju
Período18/06/0622/06/06

Áreas temáticas de ASJC Scopus

  • Ingeniería eléctrica y electrónica

Huella

Profundice en los temas de investigación de 'Cycloconverter drive system for fault diagnosis study: Real time model, simulation and construction'. En conjunto forman una huella única.

Citar esto