Comparative evaluation of three-phase AC-AC matrix converter and voltage DC-link back-to-back converter systems

Thomas Friedli, Johann W. Kolar, Jose Rodriguez, Patrick W. Wheeler

Resultado de la investigación: Article

220 Citas (Scopus)

Resumen

This paper introduces the methodology and the results of a comprehensive comparison of a direct matrix converter (MC), an indirect MC, and a voltage dc-link back-to-back converter for a 15-kW permanent magnet synchronous motor drive. The comparison involves the investigation of the passive components, including the EMI input filter, the required silicon chip area for a defined maximum admissible thermal loading of the power semiconductors, the total losses and/or achievable efficiency, a prediction of the resulting volume and weight of the passive components, and, finally, a tradeoff study between the efficiency, volume, and weight of the converters. Different performance indicators that ultimately allow a systematic determination of the application area of each converter topology are provided with this comparative evaluation.

Idioma originalEnglish
Número de artículo6099607
Páginas (desde-hasta)4487-4510
Número de páginas24
PublicaciónIEEE Transactions on Industrial Electronics
Volumen59
N.º12
DOI
EstadoPublished - 17 jul 2012

Huella dactilar

Electric potential
Synchronous motors
Permanent magnets
Topology
Semiconductor materials
Silicon
Matrix converters
Hot Temperature

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Citar esto

@article{70cf2265f8ff4e12beb32c059cf2cb74,
title = "Comparative evaluation of three-phase AC-AC matrix converter and voltage DC-link back-to-back converter systems",
abstract = "This paper introduces the methodology and the results of a comprehensive comparison of a direct matrix converter (MC), an indirect MC, and a voltage dc-link back-to-back converter for a 15-kW permanent magnet synchronous motor drive. The comparison involves the investigation of the passive components, including the EMI input filter, the required silicon chip area for a defined maximum admissible thermal loading of the power semiconductors, the total losses and/or achievable efficiency, a prediction of the resulting volume and weight of the passive components, and, finally, a tradeoff study between the efficiency, volume, and weight of the converters. Different performance indicators that ultimately allow a systematic determination of the application area of each converter topology are provided with this comparative evaluation.",
keywords = "Comparative evaluation, matrix converter (MC), voltage dc-link back-to-back converter (V-BBC)",
author = "Thomas Friedli and Kolar, {Johann W.} and Jose Rodriguez and Wheeler, {Patrick W.}",
year = "2012",
month = "7",
day = "17",
doi = "10.1109/TIE.2011.2179278",
language = "English",
volume = "59",
pages = "4487--4510",
journal = "IEEE Transactions on Industrial Electronics",
issn = "0278-0046",
publisher = "IEEE Industrial Electronics Society",
number = "12",

}

Comparative evaluation of three-phase AC-AC matrix converter and voltage DC-link back-to-back converter systems. / Friedli, Thomas; Kolar, Johann W.; Rodriguez, Jose; Wheeler, Patrick W.

En: IEEE Transactions on Industrial Electronics, Vol. 59, N.º 12, 6099607, 17.07.2012, p. 4487-4510.

Resultado de la investigación: Article

TY - JOUR

T1 - Comparative evaluation of three-phase AC-AC matrix converter and voltage DC-link back-to-back converter systems

AU - Friedli, Thomas

AU - Kolar, Johann W.

AU - Rodriguez, Jose

AU - Wheeler, Patrick W.

PY - 2012/7/17

Y1 - 2012/7/17

N2 - This paper introduces the methodology and the results of a comprehensive comparison of a direct matrix converter (MC), an indirect MC, and a voltage dc-link back-to-back converter for a 15-kW permanent magnet synchronous motor drive. The comparison involves the investigation of the passive components, including the EMI input filter, the required silicon chip area for a defined maximum admissible thermal loading of the power semiconductors, the total losses and/or achievable efficiency, a prediction of the resulting volume and weight of the passive components, and, finally, a tradeoff study between the efficiency, volume, and weight of the converters. Different performance indicators that ultimately allow a systematic determination of the application area of each converter topology are provided with this comparative evaluation.

AB - This paper introduces the methodology and the results of a comprehensive comparison of a direct matrix converter (MC), an indirect MC, and a voltage dc-link back-to-back converter for a 15-kW permanent magnet synchronous motor drive. The comparison involves the investigation of the passive components, including the EMI input filter, the required silicon chip area for a defined maximum admissible thermal loading of the power semiconductors, the total losses and/or achievable efficiency, a prediction of the resulting volume and weight of the passive components, and, finally, a tradeoff study between the efficiency, volume, and weight of the converters. Different performance indicators that ultimately allow a systematic determination of the application area of each converter topology are provided with this comparative evaluation.

KW - Comparative evaluation

KW - matrix converter (MC)

KW - voltage dc-link back-to-back converter (V-BBC)

UR - http://www.scopus.com/inward/record.url?scp=84863771411&partnerID=8YFLogxK

U2 - 10.1109/TIE.2011.2179278

DO - 10.1109/TIE.2011.2179278

M3 - Article

AN - SCOPUS:84863771411

VL - 59

SP - 4487

EP - 4510

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

SN - 0278-0046

IS - 12

M1 - 6099607

ER -