Several industrial wastes including biomass, fly ashes, red mud, mill scales, water treatment residues, have significant concentrations of metal oxides: Fe2O3, Al2O3, TiO2, SiO2 etc. Several efforts have been made towards recovering metals within these wastes. Rather than recovering one metal at a time, we report a novel approach for simultaneously extracting multiple metals from mixed oxides in a single process step. Using three distinct furnaces/heating regimes, the carbothermic reduction of Fe2O3/Al2O3/SiO2 system was investigated at 1450–1700 °C for up to 2 h over a wide composition range. Complete reduction was achieved for both Fe2O3 and SiO2 in all cases leading to the formation of Fe and Fe–Si alloys. The reduction of alumina at moderate temperatures was the key challenge. No alumina reduction was observed during reductions at 1450 °C. A partial reduction of alumina and the formation of Fe–Al alloys was detected in the Al2O3/Fe2O3/C system at 1550 °C. The formation of Fe–Si–Al alloys was also observed in the Fe2O3/SiO2/Al2O3/C system at 1550 °C. Complete reduction of alumina was observed at 1600–1700 °C, even for up to 50 wt% alumina in the system. Optimal operating conditions and reference standards were established for the simultaneous recovery of multiple metals from waste oxides. While conserving natural resources, this novel route will lower the burden on waste storage facilities with significant contributions to the economic and environmental sustainability of industrial waste management.
Áreas temáticas de ASJC Scopus
- Ingeniería ambiental
- Gestión y eliminación de residuos
- Gestión, supervisión, políticas y leyes